Step 1. Determine Door Thickness: Our tracks accommodate 1-3/8" and 1-3/4" door thicknesses.

Step 2: Determine Door Widths: Generally, your track length should be twice your door width. For a three-door track, your track should be three-times your door width.

Step 3. Select Track Length: Multiply your door width by two. Choose from pre-cut lengths: 6', 8', 12', 24'. Tracks can be cut down for custom widths.

Step 4. Determine Application: Our track systems can be used for either bypass or collection (telescoping) applications.

Step 5. Select Carriage Pack:

Bypass Applications:
Choose one pack per door. Each pack includes carriages, mounting plates, T-Guide, screws, and an adjusting wrench.
For standard operation, select M6 (200lb/90kg) or M8 (500lb/240kg). For soft close, consult our SofStop Minimum Door Width table.

Collection System (Telescoping) Application:
Select Collection Pack based on the number of doors in project. Pack includes carriages, mounting plates, adjusting wrench, extrusions, guides, and fixing screws to allow one door to pick up the next.

For two-door collection systems: select 2-Door M6 (200lb/90kg) Collection Pack or 2-Door M8 (500lb/240kg) Collection Pack.

For three-door collection systems: select the 3-door M6 (200lb/90kg) Collection Pack or 3-door M8 (500lb/240kg) Collection Pack.

A Track Stop is needed when no physical stops are present, i.e., your door does not come to rest at a closing jamb or wall stud. If this is the case for your installation, be sure to choose a carriage pack that includes a stop.